Braked Alko double axle diagram Part No. 138 514 398

AL-KO Double Axle Braked up to 2000kg with cranked arms, complete with water resistant hubs.
(Part No. 138 514 398)

Alko Double Axle

Standard dimensions for the axle are as follows:
D	=	200mm
E	=	60mm
F	=	160mm
G	=	13mm x 20mm
C1	=	Minimum 187mm Maximum 312mm
Wheel Inset	=	0-30mm
Drum Size	=	160mm

In line with Al-ko Kober Ltd policy of constant improvement, they
reserve the right to change the specifications without notice

If you are replacing an existing axle it can be manufactured by the
Type number:

Without the type number please enter the following information:


A	= mm

C	= mm

Pitch Circle Diameter	= How to calculate the PCD

Gross Weight Required	= kg

Other information required:
Name:
Postcode:
Email Address:
Telephone:
Comments:

Notes:

All made to measure axles have hot dip galvanised tubes & brackets

Please allow up 15 working days for delivery.

Flushing Kit Option: The brake backplates require additional work to facilitate the flushing kit, this may add another few days to the delivery time. The flushing kit requires assembly to the axle & trailer, instructions will be included with the kit.

Once the order is placed the information is sent to us by email. We will confirm the dimensions again with you before we accept your order. Once you have completed this form please send to us and the add the part to your basket and continue though the checkout. Payment will only be taken from your account when the order has been confirmed.